The top rivet on the splice strip is located just on top of the tapered sction of the main spar. As you will see in the next photo, I am concerned with how close the shop head of the rivet is to this material. I can see this being an issue.
skip to main |
skip to sidebar
A beautiful RV10 at Oshkosh 2009
Empennage Complete
N116EX
Posts
Total Pageviews
About my blog
- Sean
- Fort Worth, Texas, United States
- This blog is going to be a little different from most of the amateur built aircraft web sites. There are many RV10 builder sites out there that are very detailed with tons of good technical information. My site is going to take a different approach. I am going to document the construction process with real time uploads from my iPhone. I will be posting photos as I progress, and will probably elobrate on them when I have time.
A beautiful RV10 at Oshkosh 2009
Empennage Complete
Blog Archive
-
▼
2010
(52)
-
▼
February
(11)
- Drain valve attach point
- Ready to match drill stiffners
- Cutting tank stiffners
- No title
- Flap gap faring complete
- Parts primed
- Flap gap faring fitted.
- Right wing leading edge attached
- Tool shelf that I built today
- This is the close up look at how easy it will be f...
- The top rivet on the splice strip is located just ...
-
▼
February
(11)
No comments:
Post a Comment