Flap progress

Right aileron complete

Left flap frame ready to final drill

Nephew David's first airplane!

Pro sealed trailing edge, will rivet in a couple of days.

Assembly of right aileron

Top skin clamped and ready to final drill to spar.

Back riveting skins

Right aileron skins and stiffeners laid out

Finished

Bottom of VS

This was tricky

Grommets

Rib installed

Proseal

The setup

Another trial fit

Test fit

Doubler installed

Doubler primed

Antenna hole location

Fitting puck

VOR antenna Mod

I decided that I wanted my VOR/LOC/GS antenna on top of the tail. This presented many challenges because I wanted the puck to be completely hidden with no fiberglass modifications. These ar ephotos of the steps through the process. The following photos depict that mod.

Right landing light complete

Ready to install right landing light

Right tank installed!

Tank 2, no leaks!

Perfect fit!

Left aileron complete

Left aileron trailing edge pro sealed

Front view

Jonathan Hubbell's awesome RV-10

New MGL iEIFS at Oshkosh.

Parts dimpled and ready to prime

Ready to final drill

Leading edge of left aileron

Right tank finished! I will leak test after Oshkosh.

Fuel sender unit installed.

Landing the Falcon 7x in Rio!

A friend that works at Flight Safety treated me to an hour in the Falcon 7X simulator today with an instructor! All I can say is WOW! Thanks Brett!

Tank interior ribs

Right tank progress

Bottom side of tank riveted with proseal

Stiffness, drain flange, and fuel cap flange installed.

Took a break to go flying this morning.

Everything ready for prosealing tank stiffners tomorrow.